Risbridger

+44 (0) 1737 372 680
info@risbridger.com

Risbridger > Forecourt > Miscellaneous Products

Miscellaneous products including Suction Deflector and Swing Arm Assembly

Suction Deflector

A one piece assembly fitted to the bottom of suction tubes, with stainless steel rivets, to prevent debris from being pulled from tank bottom by the suction system.
This product is a standard part of the RIS-FLANGE™ Tanklid fittings range, and is fitted to our standard Suction Modules. Can also be retrofitted to existing suction pipes, providing access to them is available. Designed to prevent the debris on tank bottoms from being pulled directly into the suction system, so protecting dispenser pumps and ancilliary check valves etc
  • Reduce the amount of debris pulled from the tank by the suction system
  • Reduce the changing or cleaning of dispenser and check valve filters
  • For best results use with RIS-DIFFUSER and Air Transfer Valve (RIS-ATV)
  • RIS-DIFFUSER and Air Transfer Valve (RIS-ATV) prevent aeration and turbulence in the tank during tanker deliveries.

Swing Arm Assembly

Originally designed to allow petrol delivery nozzle hoses to be routed across pavements to the vehicle, these assemblies still enjoy quite some popularity.

Not for use on retails sites!

Our 1473 Swing Arm Assembly comprises the following items:

  • 1″ BSP swivel joint assembly – to be fixed to a wall
  • 1″ BSP back stay – 2’6″ long
  • Sliding top bracket – to support back stay on wall
  • Stainless steel cables and clips – to support yard arm (to be maximum of 13′ long)

Installer must supply the following items: yard arm, elbow and hose.

Suction Deflector

Suction Deflector

A one piece assembly fitted to the bottom of suction tubes, with stainless steel rivets, to prevent debris from being pulled from tank bottom by the suction system.
This product is a standard part of the RIS-FLANGE™ Tanklid fittings range, and is fitted to our standard Suction Modules. Can also be retrofitted to existing suction pipes, providing access to them is available. Designed to prevent the debris on tank bottoms from being pulled directly into the suction system, so protecting dispenser pumps and ancilliary check valves etc
  • Reduce the amount of debris pulled from the tank by the suction system
  • Reduce the changing or cleaning of dispenser and check valve filters
  • For best results use with RIS-DIFFUSER and Air Transfer Valve (RIS-ATV)
  • RIS-DIFFUSER and Air Transfer Valve (RIS-ATV) prevent aeration and turbulence in the tank during tanker deliveries.
Swing Arm Assembly

Swing Arm Assembly

Originally designed to allow petrol delivery nozzle hoses to be routed across pavements to the vehicle, these assemblies still enjoy quite some popularity.

Not for use on retails sites!

Our 1473 Swing Arm Assembly comprises the following items:

  • 1″ BSP swivel joint assembly – to be fixed to a wall
  • 1″ BSP back stay – 2’6″ long
  • Sliding top bracket – to support back stay on wall
  • Stainless steel cables and clips – to support yard arm (to be maximum of 13′ long)

Installer must supply the following items: yard arm, elbow and hose.